Description
Product Details
ODOT-DPM0l gateway is a Modbus-RTU/ASCII to PROFIBUS-DP protocol converter. This product can connect Modbus device to Siemens PLC(S7-300/1200/1500/400) with PROFIBUS-DP communication interface or DCS system with DP master. It adopts aluminum alloy shell with firm design and supports DIN-rail installation. All serial signal provides built-in photoelectric isolation.
👉 9-36V wide voltage input, anti-reverse connection protection.DC-DC isolation power supply, 3000V isolation voltage.
👉 2KV network port isolation protection, 10M/100Mbps rate adaptive, automatic MDI/MDIX reversal.
👉 Support TCP server pure passthrough, support two client access.
👉 Support TCP client pure passthrough, support to connect 1 server.
👉 Support UDP pure passthrough.
👉 Support with and without protocol passthrough, protocol passthrough supports MODBUS RTU/ASCII.
👉 Support for WEB browser configuration parameters.
👉 It has three interfaces of RS485, RS422 and RS232.
👉 Serial port baud rate support 1200 ~ 115200bPS.
👉 Support DHCP, more convenient to use.
👉 Support one-key reset function to restore factory Settings.
👉 35mm standard DIN-rail installation.
👉 EMC meets EN 55022:2010 & EN55024:2010 international standards.
Technical Parameters
Environmental parameters
Working temperature: -20~70℃
Storage temperature: -55~125℃
Operating humidity: 5%~95% (No condensation)
The power supply parameters
Number of power ports: 1
Input voltage: 9-36V(DC)
Power consumption: ODOT-S1E1: 700mW, ODOT-S2E1: 1200mW
Ethernet parameters
Working mode: TCP server, TCP client, UDP
Number of Ethernet ports: 1
Network protocol: TCP, UDP, HTTP
Number of TCP connections:
TCP server pure passthrough, supports 2 client accesses.
TCP client pure passthrough, support to connect 1 server.
Serial port parameters
Quantity of serial port: ODOT-S1E1: 1, ODOT-S2E1: 2
Serial communication mode: RTU mode and ASCII mode are optional.
Serial terminal resistance: 20 Ω external resistance
Supported Baud rate: 2400-115200bps
Supported validation mode: No check, odd check, even check
Number of slave stations supported: 31(RS485)
Application
S1E1 supports TCP server, TCP client, UDP pure passthrough mode. The passthrough mode supports passthrough with and without protocol. The protocol converter supports browser configuration and does not store direct forward data.
